User's Manual

Chapter 22 System
P-2612HW Series User’s Guide
386
22.2 The General Screen
Use the General screen to configure system settings such as the system and
domain name, inactivity timeout interval and system password.
The System Name is for identification purposes. However, because some ISPs
check this name you should enter your computer's "Computer Name". Find the
system name of your Windows computer by following one of the steps below.
• In Windows XP, click start, My Computer, View system information and
then click the Computer Name tab. Note the entry in the Full computer
name field and enter it as the ZyXEL Device System Name.
Click Maintenance > System to open the General screen.
Figure 232 Maintenance > System > General
The following table describes the labels in this screen.
Table 127 Maintenance > System > General
LABEL DESCRIPTION
General Setup
System Name Choose a descriptive name for identification purposes. It is
recommended you enter your computer’s “Computer name” in this field.
This name can be up to 30 alphanumeric characters long. Spaces are not
allowed, but dashes “-” and underscores "_" are accepted.
Domain Name Enter the domain name (if you know it) here. If you leave this field blank,
the ISP may assign a domain name via DHCP.
The domain name entered by you is given priority over the ISP assigned
domain name.