User's Manual

Chapter 27 Troubleshooting
P-2612HW Series User’s Guide
443
In the next example, phone port 1 is configured to use SIP account 1 and phone
port 2 is configured to use SIP account 2. In this case, every time you place a call
through phone port 1, you are using your SIP account 1. Similarly, every time you
place a call through phone port 2, you are using your SIP account 2. To apply
these configuration changes you need to configure the Analog Phone screen. See
Section 10.5 on page 194.
Figure 260 Outgoing Calls: Individual Configuration
27.6.2 Incoming Calls
The following example shows the default behavior of your ZyXEL Device for
incoming calls when two SIP accounts are configured and you are using two
phones. When a call comes in from your SIP account 1, the phones connected to
both phone port 1 and phone port 2 ring. Similarly, when a call comes in from your
Internet
SIP 1
SIP 2
PHONE 1
PHONE 2