User's Manual

Chapter 28 Product Specifications
P-2612HW Series User’s Guide
455
Wall-mounting Instructions
Do the following to hang your ZyXEL Device on a wall.
Note: See Table 164 on page 445 for the size of screws to use and how far apart to
place them.
1 Locate a high position on a wall that is free of obstructions. Use a sturdy wall.
2 Drill two holes for the screws. Make sure the distance between the centers of the
holes matches what is listed in the product specifications appendix.
Be careful to avoid damaging pipes or cables located inside the
wall when drilling holes for the screws.
3 Do not screw the screws all the way into the wall. Leave a small gap of about 0.5
cm between the heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the
weight of the ZyXEL Device with the connection cables.
5 Align the holes on the back of the ZyXEL Device with the screws on the wall. Hang
the ZyXEL Device on the screws.
Figure 263 Wall-mounting Example
EUROPEAN PLUG
STANDARDS
AC Power Adapter Model MV18-Y180100-C5
Input Power 230V~50Hz 0.5A
UNITED KINGDOM PLUG
STANDARDS
AC Power Adapter Model MV18-Y180100-B2
Input Power 230V~50Hz 0.5A
Table 169 Power Adaptor Specifications (continued)