User's Manual

Chapter 3 Wizards
P-2612HW Series User’s Guide
50
3.3.2 Manually Assign a WEP Key
Choose Manually assign a WEP key to setup WEP Encryption parameters.
Figure 19 Manually Assign a WEP key
The following table describes the labels in this screen.
5 Click Apply to save your wireless LAN settings.
Figure 20 Wireless LAN Setup 3
Table 10 Manually Assign a WEP key
LABEL DESCRIPTION
Key The WEP keys are used to encrypt data. Both the ZyXEL Device and the
wireless stations must use the same WEP key for data transmission.
Enter any 5, 13 or 29 ASCII characters or 10, 26 or 58 hexadecimal
characters ("0-9", "A-F") for a 64-bit, 128-bit or 256-bit WEP key
respectively.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.