User's Manual

Chapter 3 Wizards
P-2612HW Series User’s Guide
52
3.4.1 SIP Settings
Figure 22 VoIP Setup Wizard > SIP Settings
The following table describes the labels in this screen.
Table 11 VoIP Setup Wizard > SIP Settings
LABEL DESCRIPTION
SIP1 (- SIP10)
Settings
Use this screen to configure SIP settings for up to 10 SIP accounts.
SIP Number Enter your SIP number. In the full SIP URI (like 1234@VoIP-
provider.com), this is the part before the @ symbol. You can use up to
127 printable ASCII characters.
SIP Server
Address
Enter the IP address or domain name of the SIP server provided by your
VoIP service provider. You can use up to 95 printable ASCII characters.
It does not matter whether the SIP server is a proxy, redirect or register
server.
SIP Service
Domain
Enter the SIP service domain name. In the full SIP URI (like
[e-mail]), this is the part after the @ symbol. You can
use up to 127 printable ASCII Extended set characters.
Authentication
User Name Enter the user name for registering this SIP account, exactly as it was
given to you. You can use up to 95 printable ASCII characters.