User's Manual

Chapter 4 Tutorial
P-2612HW Series User’s Guide
58
4.2.2 Configuring the AP
Follow the steps below to configure the wireless settings on your AP.
1 Open the Network > Wireless LAN > AP screen in the AP’s web configurator.
Figure 25 AP: Wireless LAN > AP
2 Make sure Active Wireless LAN is selected.
3 Enter “SSID_Example3” as the SSID and select a channel which is not used by
another AP.
4 Set security mode to WPA-PSK and enter “ThisismyWPA-PSKpre-sharedkey” in
the Pre-Shared Key field. Click Apply.