User's Manual

Chapter 4 Tutorial
P-2612HW Series User’s Guide
67
1 Configure the WAN connection to use the first public IP address (1.2.3.4).
2 Configure NAT address mapping for other public IP addresses (1.2.3.5 and
1.2.3.6).
3 Configure NAT port forwarding to forward FTP traffic from the WAN to a specific
computer on your local network.
4.3.2 Configuring the WAN Connection with a Static IP
Address
The following table shows the information your ISP gave you for Internet
connection.
Follow the steps below to configure your ZyXEL Device for Internet access using
PPPoE in this example.
Figure 41 Tutorial Example: WAN Connection with a Static Public IP Address
Encapsulation PPPoE
VPI/VCI 8/33
Public IP Addresses 1.2.3.4
1.2.3.5
1.2.3.6
1.2.3.7
Gateway IP Address 1.2.3.89
Subnet Mask 255.255.255.0
User Name exampleuser
Password abcd1234
DNS Server 1.2.1.1
1.2.1.2
Internet
192.168.1.1
1.2.3.4
WAN
LAN