P-2802HW(L)-Ix Series 802.11g Wireless VDSL VoIP IAD Quick Start Guide Version 3.70 6/2007 Edition 1 DEFAULT LOGIN IP Address http://192.168.1.1 Password 1234 Copyright © 2007. All rights reserved.
P-2802HW(L)-Ix Series Quick Start Guide Overview The P-2802HW(L)-Ix is a router which combines high-speed VDSL Internet access, a builtin switch, a firewall and high-speed wireless networking capability. You can set the first Ethernet port as a WAN port. See the WAN chapter in the User’s Guide for more information. It has phone ports for making calls over the Internet (Voice over IP or VoIP). The P2802HWL can use regular phone services through regular (PSTN) phone lines.
P-2802HW(L)-Ix Series Quick Start Guide 1 Requirements Make sure you have the following things before you set up your P-2802HW(L)-Ix. • Internet access - account information provided by your ISP, such as user name, password, and so on. • VoIP account - You need the account information provided by your VoIP service provider (the company that lets you make phone calls over the Internet). • Internet Explorer 6.0 or later or Netscape Navigator 7.0 or later, with JavaScript enabled.
P-2802HW(L)-Ix Series Quick Start Guide 2 Hardware Connections 1 DSL: Use a telephone wire to connect this port to the DSL or MODEM jack on a splitter. 2 LINE (P-2802HWL-Ix only): Use the green PSTN cable to connect the TEL or PHONE jack on the splitter to this port. Connect the splitter to a telephone jack. " When the P-2802HWL-Ix does not have power, the phone(s) connected to the PHONE port(s) can still be used for making calls. Only one phone can be in use at a time.
P-2802HW(L)-Ix Series Quick Start Guide 4 PHONE 1-2: Use telephone cables (and any telephone adaptors provided with your P2802HW(L)-Ix) to connect your telephones to these ports. If you only have one telephone, you should use port 1. 5 Use the power adaptor provided with your P-2802HW(L)-Ix to connect an appropriate power source to this socket. 6 Push the power switch to the on position. Look at the LEDs (lights) on the side panel of the P-2802HW(L)-Ix.
P-2802HW(L)-Ix Series Quick Start Guide 3 Initial Configuration 1 Open your browser and enter the P2802HW(L)-Ix's IP address 192.168.1.1 (default) as the URL. 2 Enter the admin password 1234 (default). Click Login. If your browser cannot find this screen, make sure your browser is configured correctly. See Troubleshooting in the User’s Guide for details. 3 Follow the directions in this screen. 4 Click Apply to replace the P2802HW(L)-Ix’s default digital certificate. 5 Click Go to Wizard setup.
P-2802HW(L)-Ix Series Quick Start Guide 3.1 Connection Wizard The connection wizard helps you set up your Internet connection as well as your wireless settings. Click INTERNET/WIRELESS SETUP. " Enter the Internet access information exactly as given to you by your ISP in each wizard screen and then click Next to continue or click Back to return to the previous screen. Current screen information will be lost if you click Back.
P-2802HW(L)-Ix Series Quick Start Guide STEP 1: Internet Configuration 1 Select Routing (default) from the drop-down list box if your ISP give you one IP address only and you want multiple computers to share an Internet account. Select Bridge when your ISP provides you more than one IP address and you also want the connected computers to get individual IP address from ISP’s DHCP server directly. If you select Bridge, you cannot use Firewall, QoS, DHCP server and NAT on the ZyXEL Device.
P-2802HW(L)-Ix Series Quick Start Guide A B PPP over Ethernet Connection A Type a User Name, Password and Service Name (Optional). Click Apply. " When you use the connection wizard to configure the Internet access using PPPoE, the P-2802HW(L)-Ix is set to get an IP address from the ISP automatically. To set up a static WAN IP address with PPPoE, use the Network > WAN screen. See your User’s Guide for detailed information. B Wait for the P-2802HW(L)-Ix to finish testing your WAN connection.
P-2802HW(L)-Ix Series Quick Start Guide 3 If the connection test fails, the screen displays as shown. Check if your account is activated and click the link in the screen to go back to the wizard welcome screen to reconfigure or verify your Internet access settings. STEP 2: Wireless LAN After you configure the Internet access information, select Yes and click Next to configure wireless settings.
P-2802HW(L)-Ix Series Quick Start Guide A B C D E F 3.2 Setting Up a Wireless Network To set up a wireless network you need at least one wireless network card/adapter. • If you have a desktop computer, use either a wireless USB adapter or a wireless PCI adapter. • If you have a laptop, use either a wireless USB adapter or a wireless CardBus card. These are built into many laptops.
P-2802HW(L)-Ix Series Quick Start Guide Alternatively, use OTIST, ZyXEL’s One-Touch Intelligent Security Technology (OTIST) feature. It allows you to automatically configure the SSID and WPA-PSK on all OTISTequipped wireless clients within range of the P-2802HW(L)-Ix. See the wireless LAN chapter in the User’s Guide for more information on OTIST. 3.3 Configure VoIP Click VOICE OVER INTERNET SETUP. " You should have the information provided by your VoIP service provider.
P-2802HW(L)-Ix Series Quick Start Guide In the main screen, click VoIP > PSTN Line. PSTN Line Pre-fix Number: Enter a prefix (up to seven numbers) you dial before you dial the phone number, if you want to make a regular phone call while one of your SIP accounts is registered. These numbers tell the P2802HWL-Ix that you want to make a regular phone call. Relay to PSTN Line: Enter phone numbers for regular phone calls (that do not use the Internet) that you always want to dial without the prefix number.
P-2802HW(L)-Ix Series Quick Start Guide Troubleshooting V If you cannot access the P-2802HW(L)-Ix, follow these steps. 1 Check the device’s lights. If they are different than what is described in Section 2, make sure the connections are correct, and inspect your cables for damage. If the lights are still different, turn off the device, wait a few seconds, and turn it on again. 2 Make sure your computer is on the same subnet as the P-2802HW(L)-Ix.
P-2802HW(L)-Ix Series Quick Start Guide Viewing Your Product’s Certifications 1 Go to www.zyxel.com. 2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3 Select the certification you wish to view from this page.