User's Manual

Chapter 9 Wireless LAN
P-660HW-Tx v3 User’s Guide
138
9.3.6 MAC Filter
To change your ZyXEL Device’s MAC filter settings, click the Edit icon in the Network >
Wireless LAN screen. The screen appears as shown.
Figure 90 MAC Address Filter
The following table describes the labels in this menu.
Apply Click Apply to save your changes to the ZyXEL Device.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 50 Wireless LAN: Advanced
LABEL DESCRIPTION
Table 51 MAC Address Filter
LABEL DESCRIPTION
Active MAC
Filter
Select the check box to enable MAC address filtering.
Filter Action Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny to block access to the ZyXEL Device, MAC addresses not listed will be
allowed to access the ZyXEL Device
Select Allow to permit access to the ZyXEL Device, MAC addresses not listed will be
denied access to the ZyXEL Device.
Set This is the index number of the MAC address.
MAC
Address
Enter the MAC addresses of the wireless client that are allowed or denied access to
the ZyXEL Device in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
Back Click Back to return to the previous screen.