User's Manual

Chapter 5 Wizard Setup for Internet Access
P-660HW-Tx v3 User’s Guide
87
5.3.2 Manually assign a WEP key
Choose Manually assign a WEP key to setup WEP Encryption parameters.
Figure 58 Manually assign a WEP key
The following table describes the labels in this screen.
5 Click Apply to save your wireless LAN settings.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.
Table 28 Manually assign a WPA key
LABEL DESCRIPTION
Table 29 Manually assign a WEP key
LABEL DESCRIPTION
Key The WEP keys are used to encrypt data. Both the ZyXEL Device and the wireless
stations must use the same WEP key for data transmission.
Enter any 5 or 13 ASCII characters or 10 or 26 hexadecimal characters ("0-9", "A-F")
for a 64-bit or 128-bit WEP key respectively.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.