User Guide

P-660HN Series Support Notes

Window98 PPTP Client / Internet / NT RAS Server Protocol Stack

PPTP appears as new modem type (Virtual Private Networking Adapter) that

can be selected when setting up a connection in the Dial-Up Networking folder.

The VPN Adapter type does not appear elsewhere in the system. Since PPTP

encapsulates its data stream in the PPP protocol, the VPN requires a second

dial-up adapter. This second dial-up adapter for VPN is added during the

installation phase of the Upgrade in addition to the first dial-up adapter that

provides PPP support for the analog or ISDN modem.

The PPTP is supported in Windows NT and Windows 98 already. For

Windows 95, it needs to be upgraded by the Dial-Up Networking 1.2 upgrade.

Configuration

This application note explains how to establish a PPTP connection with a

remote private network in the P-660HN-T1A SUA case. All PPTP packets can

be forwarded to the internal PPTP Server (WinNT server) behind SUA. The

port number of the PPTP has to be entered in the Web Configurator, Advanced

Setup, Network -> NAT -> Port Forwarding on P-660HN-T1A to forward to

the appropriate private IP address of Windows NT server.