User Guide

P-660HN Series Support Notes

The following table describes the fields in this screen.

Field

Description

Option/Example

Type

You can select one of the five mapping types from the

pull-down menu

1. One-to-One

2. Many-to-One

3. Many-to-Many

Overload

4. Many-to-Many No

Overload

5. Server

Local

Start

This is the starting local IP address (ILA)

0.0.0.0

End

This is the ending local IP address (ILA). If the rule is

for all local IPs, then put the Start IP as 0.0.0.0 and the

End IP as 255.255.255.255. This field is N/A for

One-to-One type.

255.255.255.255

Global

Start

This is the starting global IP address (IGA). If you have

a dynamic IP, enter 0.0.0.0 as the Global Start IP.

0.0.0.0

End

This is the ending global IP address (IGA). This

field is N/A for One-to-One, Many-to-One and Server

types.

200.1.1.64

Note: For all Local and Global IPs, the End IP address must begin after the IP

Start address, i.e., you cannot have an End IP address beginning before the

Start IP address.

 Configure Address Mapping Sets in CLI

Setp 1: Telnet to the P-660HN-T1A. (We suppose the LAN IP Address of

P-660HN-T1A is 192.168.1.1)

Step 2: Select one Address Mapping Set (#1~#8) by command „ip nat

addrmap map [map #] [set name]‟ (set name is optional). Suppose we

configure set 2 in the example.