User's Manual

Appendix A Setting up Your Computer’s IP Address
P-660RU-Tx User’s Guide
191
2 Select Ethernet built-in from the Connect via list.
Figure 98 Macintosh OS 8/9: TCP/IP
3 For dynamically assigned settings, select Using DHCP Server from the
Configure: list.
4 For statically assigned settings, do the following:
•From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your P-660RU-Tx in the Router address box.
5 Close the TCP/IP Control Panel.
6 Click Save if prompted, to save changes to your configuration.
7 Turn on your P-660RU-Tx and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the TCP/IP Control Panel window.