User's Manual

Chapter 1 Introducing the P-660RU-Tx
P-660RU-Tx User’s Guide
28
1.5 LEDs (Lights)
The following graphic displays the labels of the LEDs.
Figure 2 LEDs on the Top of the Device
None of the LEDs are on if the P-660RU-Tx is not receiving power.
Table 1 LED Descriptions
LED COLOR STATUS DESCRIPTION
POWER Green On The P-660RU-Tx is receiving power and ready for use.
Blinking The P-660RU-Tx is self-testing.
Off The P-660RU-Tx is not receiving power.
Red On The P-660RU-Tx has failed from power self-testing or
there is malfunction.
ETHERNET Green On The P-660RU-Tx has an Ethernet connection with a
device on the Local Area Network (LAN).
Blinking The P-660RU-Tx is sending/receiving data to /from the
LAN.
Off The P-660RU-Tx does not have an Ethernet connection
with the LAN.
DSL Green On The DSL line is up.
Blinking The P-660RU-Tx is initializing the DSL line.
Off The DSL line is down.
INTERNET Green On The P-660RU-Tx has an IP connection but no traffic.
Your device has a WAN IP address (either static or
assigned by a DHCP server), PPP negotiation was
successfully completed (if used) and the DSL
connection is up.
Blinking The P-660RU-Tx is sending or receiving IP traffic.
Red On The P-660RU-Tx attempted to make an IP connection
but failed. Possible causes are no response from a DHCP
server, no PPPoE response, PPPoE authentication failed.
Off The P-660RU-Tx does not have an IP connection.