User's Manual

Chapter 9 Static Route
P-660RU-Tx User’s Guide
86
9.2 The Routing Table List Screen
Use this screen to view the static route rules. Click Advanced Setup > Routing
to display the following screen.
Figure 32 Advanced Setup > Routing Table List
The following table describes the labels in this screen.
Table 19 Advanced Setup > Routing Table List
LABEL DESCRIPTION
# This is the number of an individual static route.
Dest IP This parameter specifies the IP network address of the final destination.
Routing is always based on network number.
Mask This parameter specifies the IP network subnet mask of the final
destination.
Gateway IP This is the IP address of the gateway. The gateway is a router or switch
on the same network segment as the device's LAN or WAN port. The
gateway helps forward packets to their destinations.
Metric This field displays the priority of each route on the P-660RU-Tx.
Device This is the name that describes or identifies this route.
Use This is the number of times the route was used.
Edit Click this to go to the screen where you can set up a static route on the
P-660RU-Tx. You cannot edit the default routes.
Drop Click this to remove a static route from the P-660RU-Tx. You cannot
delete the default routes.
ADD ROUTE Click this to add a new static route on the P-660RU-Tx.