Owner's Manual

Chapter 5 Powerline Network Setup Tutorial
PLA4215 User’s Guide
38
5.2 Accessing Your Powerline Adapter
1 Plug the powerline adapter you want to add to your network into a power socket and, if needed,
switch the power socket on.
Figure 19 Plug Your Powerline Adapter into a Power Socket
2 Connect the powerline adapter to your computer.
3 Use a LAN or Ethernet cable (shown below) to connect the LAN or Ethernet port on your adapter to
the same kind of port on your computer.
Figure 20 Connect Your Powerline Adapter to a Computer
4 Open the PLA42xx Series Configuration Utility on your computer. Go to Start > (All)
Programs > ZyXEL PLA42xx Series Configuration > PLA42xx Series Configuration Utility,
or click on the icon on your desktop shown below.
Figure 21 Click on the PLA42xx Series Configuration Utility Icon
5 You are now ready to extend your powerline network or set up a second network.
•See Section 5.3 on page 39 to add a new powerline adapter to your network.
•See Section 5.4 on page 40 to set up a second network with your new adapters.
1
2
3