Operation Manual

Chapter 2 The Web Configurator
SBG3300-N Series User’s Guide
26
2.2.2 Main Window
The main window displays information and configuration fields. It is discussed in the rest of this
document. See Chapter 4 on page 37 for more information about the Status screen.
If you click Virtual Device on the System Info screen, a graphic shows the connection status of
the Device’s ports. The connected interfaces are in color and disconnected interfaces are gray.
Figure 11 Virtual Device
2.2.3 Navigation Panel
Use the menu items on the navigation panel to open screens to configure Device features. The
following tables describe each menu item.
Table 3 Navigation Panel Summary
LINK TAB FUNCTION
Status Click this to go to the main Web Configurator screen.
Network Setting
Broadband Broadband Use this screen to view and configure ISP parameters, WAN IP
address assignment, and other advanced properties. You can also add
new WAN connections.
3G WAN Use this screen to configure 3G WAN connection.
Add New 3G
Dongle
Use this screen to view or add a new 3G dongle.
Advanced Use this screen to enable or disable PTM over ADSL, Annex M, and
DSL PhyR functions.
802.1x Use this screen to view and configure the IEEE 802.1x settings on the
Device.
multi-WAN Use this screen to configure the multiple WAN load balance and
failover rules to distribute traffic among different interfaces.