Operation Manual

Chapter 29 Remote Management
SBG3300-N Series User’s Guide
260
The following table describes the fields in this screen.
Table 117 Maintenance > Remote MGMT
LABEL DESCRIPTION
Services This is the service you may use to access the Device.
LAN/WLAN Select the Enable check box for the corresponding services that you want to allow access to
the Device from the LAN/WLAN.
WAN Select the Enable check box for the corresponding services that you want to allow access to
the Device from the WAN.
Trust Domain Select the Enable check box for the corresponding services that you want to allow access to
the Device from the Trust Domain.
Port You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Trust Domain Configure a list of public IP addresses allowed to access the Device.
Status This field displays whether the Trust Domain is active or not.
IP Address Use the Add, Delete, and Edit buttons to edit a list of public IP addresses from which to
allow access to the Device through the services for which you select Trust Domain.
Certificate
HTTPS
Certificate
Select a certificate the HTTPS server (the Device) uses to authenticate itself to the HTTPS
client. You must have certificates already configured in the Certificates screen.
Apply Click Apply to save your changes back to the Device.
Cancel Click Cancel to restore your previously saved settings.