Operation Manual

Chapter 33 E-mail Notification
SBG3300-N Series User’s Guide
270
33.2.1 Email Notification Edit
Click the Add button in the Email Notification screen. Use this screen to configure the required
information for sending e-mail via a mail server.
Figure 150 Email Notification > Add
The following table describes the labels in this screen.
Table 122 Email Notification > Add
LABEL DESCRIPTION
Mail Server Address Enter the server name or the IP address of the mail server for the e-mail address
specified in the Account Email Address field.
If this field is left blank, reports, logs or notifications will not be sent via e-mail.
Authentication
Username
Enter the user name (up to 32 characters). This is usually the user name of a mail
account you specified in the Account Email Address field.
Authentication
Password
Enter the password associated with the user name above.
Account Email
Address
Enter the e-mail address that you want to be in the from/sender line of the e-mail
notification that the Device sends.
If you activate SSL/TLS authentication, the e-mail address must be able to be
authenticated by the mail server as well.
Apply Click this button to save your changes and return to the previous screen.
Cancel Click this button to begin configuring this screen afresh.