Operation Manual

Chapter 35 Firmware and WWAN Package Upgrade
SBG3300-N Series User’s Guide
276
The following table describes the labels in this screen.
After you see the firmware updating screen, wait two minutes before logging into the Device again.
Figure 154 Firmware Uploading
The Device automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 155 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
Table 124 Maintenance > Firmware Upgrade
LABEL DESCRIPTION
Current Firmware
Version
This is the present firmware version
File Path Type in the location of the file you want to upload in this field or click Browse ... to find
it.
Browse... Click this to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Upload Click this to begin the upload process. This process may take up to two minutes.
Current WWAN
Package Version
This is the current version of the WWAN (Wireless Wide Area Network) package
installed on the Device. A WWAN package adds support for more USB 3G dongles
without you having to upgrade the Device firmware.
File Path Type in the location of the file you want to upload in this field or click Browse ... to find
it.
Browse... Click this to find the WWAN file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload Click this to begin the upload process. This process may take up to two minutes.