Operation Manual

Chapter 5 Broadband
SBG3300-N Series User’s Guide
59
5.4.1 Add 3G Dongle Information
Click Add New Entry in the Add New 3G Dongle screen to show the following. Enter the
information for a new 3G dongle to add it.
Figure 27 Add 3G Dongle Information
The following table describes the labels in this screen.
5.5 The Advanced Screen
Use the Advanced screen to enable or disable PTM over ADSL, Annex M, and DSL PhyR functions.
The Device supports the PhyR retransmission scheme. PhyR is a retransmission scheme designed to
provide protection against noise on the DSL line. It improves voice, video and data transmission
resilience by utilizing a retransmission buffer.
Table 12 Add 3G Dongle Information
LABEL DESCRIPTION
Default VID Enter the default vendor ID of the 3G dongle.
Default PID Enter the default product ID of the 3G dongle.
Target VID Enter the target vendor ID of the 3G dongle.
Target PID Enter the target product ID of the 3G dongle.
Port Number Enter the specified device port of the 3G dongle.
Class Enter the target device class of the 3G dongle.
Message
Content
Enter the input message content of the 3G dongle.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.