Operation Manual

Chapter 5 Broadband

SBG3300-N Series User’s Guide

The following table describes the labels in this screen.

5.6.1 Edit 802.1x Settings

Use this screen to edit a 802.1x authentication’s settings. Click the Edit icon next to the rule you

want to edit. The screen shown next appears.

Figure 30 802.1x: Add/Edit

The following table describes the labels in this screen.

Table 14 Network Setting > Network Setting > 802.1x

LABEL DESCRIPTION

# This is the index number of the entry.

Status This field displays whether the authentication is active or not. A yellow bulb signifies that

this authentication is active. A gray bulb signifies that this authentication is not active.

Interface This is the interface that uses the authentication. This displays N/A when there is no

interface assigned.

EAP Identity This shows the EAP identity of the authentication. This displays N/A when there is no EAP

identity assigned.

EAP method This shows the EAP method used in the authentication. This displays N/A when there is no

EAP method assigned.

Bidirectional

Authentication

This shows whether bidirectional authentication is allowed.

Certificate This shows the certificate used for this authentication. This displays N/A when there is no

certificate assigned.

Trusted CA This shows the Trusted CA used for this authentication. This displays N/A when there is no

Trusted CA assigned.

Apply Click Apply to save your changes back to the Device.

Cancel Click Cancel to return to the previous configuration.

Table 15 802.1x: Add/Edit (Sheet 1 of 2)

LABEL DESCRIPTION

Active This field allows you to activate/deactivate the authentication.

Select this to enable the authentication. Clear this to disable this authentication without

having to delete the entry.

Interface Select the interface that uses the authentication.

EAP Identity Enter the EAP identity of the authentication.