Operation Manual
Table Of Contents
- VMG4825-B10A
- User’s Guide
- Introducing the VMG
- The Web Configurator
- Quick Start
- Tutorials
- 4.1 Overview
- 4.2 Setting Up an ADSL PPPoE Connection
- 4.3 Setting Up a Secure Wireless Network
- 4.4 Setting Up Multiple Wireless Groups
- 4.5 Configuring Static Route for Routing to Another Network
- 4.6 Configuring QoS Queue and Class Setup
- 4.7 Access the VMG Using DDNS
- 4.8 Configuring the MAC Address Filter
- 4.9 Access Your Shared Files From a Computer
- Technical Reference
- Network Map and Status Screens
- Broadband
- Wireless
- Home Networking
- Routing
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Dynamic DNS Setup
- VLAN Group
- Interface Grouping
- USB Service
- Firewall
- MAC Filter
- Parental Control
- Scheduler Rule
- Certificates
- Log
- Traffic Status
- ARP Table
- Routing Table
- Multicast Status
- xDSL Statistics
- System
- User Account
- Remote Management
- SNMP
- Time Settings
- E-mail Notification
- Log Setting
- Firmware Upgrade
- Backup/Restore
- Diagnostic
- Troubleshooting
- Appendices
Chapter 8 Home Networking
VMG4825-B10A User’s Guide
116
EUI64 Select this to have the VMG generate an interface ID for the LAN interface’s link-local
address using the EUI-64 format.
Manual
Select this to manually enter an interface ID for the LAN interface’s link-local address.
Lan Global Identifier Type
EUI64
Select this to have the VMG generate an interface ID using the EUI-64 format for its global
address .
Manual
Select this to manually enter an interface ID for the LAN interface’s global IPv6 address.
LAN IPv6 Address Setup
Delegate prefix
from WAN
Select this option to automatically obtain an IPv6 network prefix from the service provider
or an uplink router.
Static
Select this option to configure a fixed IPv6 address for the VMG’s LAN IPv6 address.
MLD Snooping Multicast Listener Discovery (MLD) allows an IPv6 switch or router to discover the presence
of MLD hosts who wish to receive multicast packets and the IP addresses of multicast
groups the hosts want to join on its network.
Active
Select Enable to activate MLD Snooping on the VMG. This allows the VMG to check MLD
packets passing through it and learn the multicast group membership. It helps reduce
multicast traffic.
LAN IPv6
Address Assign
Setup
Select how you want to obtain an IPv6 address:
• Stateless: The VMG uses IPv6 stateless autoconfiguration. RADVD (Router
Advertisement Daemon) is enabled to have the VMG send IPv6 prefix information in
router advertisements periodically and in response to router solicitations. DHCPv6 server
is disabled.
• Stateful: The VMG uses IPv6 stateful autoconfiguration. The DHCPv6 server is enabled
to have the VMG act as a DHCPv6 server and pass IPv6 addresses to DHCPv6 clients.
• Stateless and Stateful: The VMG uses both IPv6 stateless and stateful
autoconfiguration. The LAN IPv6 clients can obtain IPv6 addresses either through router
advertisements or through DHCPv6.
LAN IPv6 DNS
Assign Setup
Select how the VMG provide DNS server and domain name information to the clients:
• From Router Advertisement: The VMG provides DNS information through router
advertisements.
• From DHCPv6 Server: The VMG provides DNS information through DHCPv6.
• From RA & DHCPv6 Server: The VMG provides DNS information through both router
advertisements and DHCPv6.
DHCPv6 Configuration
DHCPv6 Active
This shows the status of the DHCPv6. DHCPv6 Server displays if you configured the VMG
to act as a DHCPv6 server which assigns IPv6 addresses and/or DNS information to clients.
IPv6 Router Advertisement State
RADVD Active
This shows whether RADVD is enabled or not.
IPv6 DNS Values
IPv6 DNS
Server 1-3
Select From ISP if your ISP dynamically assigns IPv6 DNS server information.
Select User-Defined if you have the IPv6 address of a DNS server. Enter the DNS server
IPv6 addresses the VMG passes to the DHCP clients.
Select None if you do not want to configure IPv6 DNS servers.
Table 28 Network Setting > Home Networking > LAN Setup (continued)
LABEL DESCRIPTION