Operation Manual
Table Of Contents
- VMG4825-B10A
- User’s Guide
- Introducing the VMG
- The Web Configurator
- Quick Start
- Tutorials
- 4.1 Overview
- 4.2 Setting Up an ADSL PPPoE Connection
- 4.3 Setting Up a Secure Wireless Network
- 4.4 Setting Up Multiple Wireless Groups
- 4.5 Configuring Static Route for Routing to Another Network
- 4.6 Configuring QoS Queue and Class Setup
- 4.7 Access the VMG Using DDNS
- 4.8 Configuring the MAC Address Filter
- 4.9 Access Your Shared Files From a Computer
- Technical Reference
- Network Map and Status Screens
- Broadband
- Wireless
- Home Networking
- Routing
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Dynamic DNS Setup
- VLAN Group
- Interface Grouping
- USB Service
- Firewall
- MAC Filter
- Parental Control
- Scheduler Rule
- Certificates
- Log
- Traffic Status
- ARP Table
- Routing Table
- Multicast Status
- xDSL Statistics
- System
- User Account
- Remote Management
- SNMP
- Time Settings
- E-mail Notification
- Log Setting
- Firmware Upgrade
- Backup/Restore
- Diagnostic
- Troubleshooting
- Appendices
VMG4825-B10A User’s Guide
221
CHAPTER 27
System
27.1 Overview
In the System screen, you can name your VMG (Host) and give it an associated domain name for
identification purposes.
27.2 The System Screen
Click Maintenance > System to open the following screen.
Figure 136 Maintenance > System
The following table describes the labels in this screen.
Table 106 Maintenance > System
LABEL DESCRIPTION
Host Name Type a hostname for your VMG. Enter a descriptive name of up to 16 alphanumeric
characters, not including spaces, underscores, and dashes.
Domain Name Type a Domain name for your host VMG.
Apply Click Apply to save your changes.
Cancel Click Cancel to abandon this screen without saving.