Users Manual Part 1

EMG6726/8726-B10A User’s Guide
27
CHAPTER 2
The Web Configurator
2.1 Overview
The web configurator is an HTML-based management interface that allows easy EMG setup and
management via Internet browser. Use Internet Explorer 8.0 and later versions or Mozilla Firefox 3 and
later versions or Safari 2.0 and later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your
EMG. Web pop-up blocking is enabled by default in
Windows XP SP (Service Pack) 2.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
2.1.1 Accessing the Web Configurator
1 Make sure your EMG hardware is properly connected (refer to the Quick Start Guide).
2 Launch your web browser. If the EMG does not automatically re-direct you to the login screen, go to
http://192.168.1.1.
3 A password screen displays. To access the administrative web configurator and manage the EMG, type
the default username admin and password (see the back label on your EMG) in the password screen
and click Login. If you have changed the password, enter your password and click Login.
Figure 11 Password Screen
4 The following screen displays if you have not yet changed your password. Enter a new password, retype
it to confirm and click Apply.