Users Manual Part 1

Chapter 2 The Web Configurator
EMG6726/8726-B10A User’s Guide
31
QoS General Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Queue Setup Use this screen to configure QoS queues.
Classification
Setup
Use this screen to define a classifier.
Shaper Setup Use this screen to limit outgoing traffic rate on the selected interface.
Policer Setup Use this screen to configure QoS policers.
Monitor Use this screen to view statistics of QoS on WAN/LAN interface and the
status of queues.
NAT Port Forwarding Use this screen to make your local servers visible to the outside world.
Applications Use this screen to configure servers behind the EMG.
Port Triggering Use this screen to change your EMG’s port triggering settings.
DMZ Use this screen to configure a default server which receives packets from
ports that are not specified in the Port Forwarding screen.
ALG Use this screen to enable or disable SIP ALG.
Address Mapping Use this screen to change your EMG’s address mapping settings.
Sessions Use this screen to configure the maximum number of NAT sessions each
client host is allowed to have through the EMG.
DNS DNS Entry Use this screen to view and configure DNS routes.
Dynamic DNS Use this screen to allow a static hostname alias for a dynamic IP address.
IGMP/MLD IGMP/MLD Use this screen to configure multicast settings (IGMP for IPv4 and MLD for
IPv6 multicast groups) on the WAN.
Vlan Group Vlan Group Use this screen to group and tag VLAN IDs to outgoing traffic from the
specified interface.
Interface
Grouping
Interface
Grouping
Use this screen to map a port to a PVC or bridge group.
Home
Connectivity
ONE Connect Use this screen to enable the one connect function on the EMG.
Security
Firewall General Use this screen to configure the security level of your firewall.
Protocol Use this screen to add Internet services and configure firewall rules.
Access Control Use this screen to enable specific traffic directions for network services.
DoS Use this screen to activate protection against Denial of Service (DoS)
attacks.
MAC Filter MAC Filter Use this screen to block or allow traffic from devices of certain MAC
addresses to the EMG.
Parental
Control
Parental Control Use this screen to block web sites with the specific URL.
Scheduler Rule Scheduler Rule Use this screen to configure the days and times when a configured
restriction (such as parental control) is enforced.
Certificates Local Certificates Use this screen to view a summary list of certificates and manage
certificates and certification requests.
Trusted CA Use this screen to view and manage the list of the trusted CAs.
VoIP (for EMG8726-B10A)
Table 7 Navigation Panel Summary (continued)
LINK TAB FUNCTION