Users Manual Part 1

Chapter 2 The Web Configurator
EMG6726/8726-B10A User’s Guide
33
SNMP SNMP Use this screen to configure SNMP (Simple Network Management
Protocol) settings.
Time Time Use this screen to change your EMG’s time and date.
E-mail
Notification
E-mail
Notification
Use this screen to configure up to two mail servers and sender addresses
on the EMG.
Log Setting Log Setting Use this screen to change your EMG’s log settings.
Firmware
Upgrade
Firmware
Upgrade
Use this screen to upload firmware to your EMG.
Backup/Restore Backup/Restore Use this screen to backup and restore your EMG’s configuration (settings)
or reset the factory default settings.
Reboot Reboot Use this screen to reboot the EMG without turning the power off.
Diagnostic Ping&Traceroute
&Nslookup
Use this screen to identify problems with the Ethernet WAN connection.
You can use Ping, TraceRoute, or Nslookup to help you identify problems.
802.1ag Use this screen to configure CFM (Connectivity Fault Management) MD
(maintenance domain) and MA (maintenance association), perform
connectivity tests and view test reports.
802.3ah Use this screen to configure link OAM port parameters.
Table 7 Navigation Panel Summary (continued)
LINK TAB FUNCTION