Users Manual Part 1

EMG6726/8726-B10A User’s Guide
37
CHAPTER 4
Tutorials
4.1 Overview
This chapter shows you how to use the EMG’s various features.
• Setting Up a New WAN Connection, see page 37
• Setting Up a Secure Wireless Network, see page 40
• Setting Up Multiple Wireless Groups, see page 48
• Configuring Static Route for Routing to Another Network, see page 51
• Configuring QoS Queue and Class Setup, see page 53
• Access the EMG Using DDNS, see page 56
• Configuring the MAC Address Filter, see page 57
4.2 Setting Up a New WAN Connection
This tutorial shows you how to set up a new WAN Internet connection using the Web Configurator.
If you have another broadband modem or router available, you can connect the WAN port to the
router and access the Internet via an Ethernet connection.
1 Click Network Setting > Broadband to open the following screen. Click Add New WAN Interface.
2 In this example, the Ethernet WAN connection has the following information.
General
Active Enable
Name MyWANConnection
Type Ethernet
Mode Routing