Users Manual Part 1

Chapter 4 Tutorials

EMG6726/8726-B10A User’s Guide

Try to connect to a website to see if you have correctly set up your Internet connection.

4.3 Setting Up a Secure Wireless Network

Thomas wants to set up a wireless network so that he can use his notebook to access the Internet. In this

wireless network, the EMG serves as an access point (AP), and the notebook is the wireless client. The

wireless client can access the Internet through the AP.

Thomas has to configure the wireless network settings on the EMG. Then he can set up a wireless network

using WPS (Section 4.3.2 on page 42) or manual configuration (Section 4.3.3 on page 44).

4.3.1 Configuring the Wireless Network Settings

This example uses the following parameters to set up a 2.4G wireless network.

1 Click Network Setting > Wireless > WiFi and click the Edit button. Note that you may see one or two

network name(s) displayed on this screen depending on whether you have selected Keep 2.4G and 5G

WiFi network name the same.

WiFi Network Name Example

WiFi Enable

WiFi Security Type WPA2-PSK

WiFi Password DoNotStealMyWirelessNetwork

802.11 Mode 802.11b/g/n Mixed