Users Manual Part 1

Chapter 4 Tutorials

EMG6726/8726-B10A User’s Guide

Thomas can now use the WPS feature to establish a wireless connection between his notebook and the

EMG (see Section 4.3.2 on page 42). He can also use the notebook’s wireless client to search for the

EMG (see Section 4.3.3 on page 44).

4.3.2 Using WPS

This section shows you how to set up a wireless network using WPS. It uses the EMG as the AP and a WPS-

enabled Android 4.4.2 smartphone as the wireless client.

to set up the wireless client settings:

1 Make sure that your EMG is turned on and your Android 4.42 smartphone is within the cover range of the

wireless signal.

2 Make sure WPS is enabled on the EMG. You can check it by logging into the EMG’s Web Configurator

and see if it is enabled in the Network Setting > Wireless > Advanced screen. If not, select the WPS

checkbox for the 2.4G or 5G wireless network and then click Apply.

Note: When the MESH function is enabled (see Section 7.7 on page 87), the EMG

automatically enables WPS and grays the field out on this Network Setting > Wireless >

Advanced

screen.