Users Manual Part 1

Chapter 4 Tutorials
EMG6726/8726-B10A User’s Guide
44
Example WPS Process: PBC Method
4.3.3 Connecting to the EMG’s Wi-Fi Network Manually (No WPS)
In this example, we change the EMG’s wireless settings, and then manually select the EMG’s new SSID
and enter the Wi-Fi key to connect a wireless client to the EMG.
4.3.4 Configuring Wireless Security on the EMG
This section shows you how to configure wireless security settings with the following parameters on your
EMG.
Follow the steps below to configure the wireless settings on your EMG.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see Section 2.2 on page 29).
1 Go to the Network Setting > Wireless > WiFi > Edit screen to enable the 2.4 GHz wireless network.
Wireless Client
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES
EMG
WPS
Press and hold for
more than 5 seconds
Frequency Band 2.4 GHz
SSID SSID_Example
Channel Auto
Security WPA2-PSK
(Wireless Password: ThisismyWPA-PSKpre-sharedkey)