Users Manual Part 1

Chapter 7 Wireless

EMG6726/8726-B10A User’s Guide

7.2 The WiFi Screen

Use this screen to view the wireless network name and password. You can also click the Edit icon to

configure the settings.

Click Network Setting > Wireless to open the WiFi screen.

Figure 28 Network Setting > Wireless > WiFi

Figure 29 Network Setting > Wireless > WiFi (Without Keeping 2.4G and 5G WiFi Network Name The

Same)

The following table describes the general wireless LAN labels in this screen.

7.2.1 The WiFi Edit Screen

Use this screen to view and configure the wireless network name, password and security type. Click the

Edit icon on the Network Setting > Wireless > WiFi screen to open the WiFi Edit screen.

Table 14 Network Setting > Wireless > WiFi

LABEL DESCRIPTION

Keep 2.4G and

5G WiFi network

name the same

Select this if you want the EMG use the same wireless network name, password, and security

type for both the 2.4GHz and 5GHz band networks. Clear this to have the screen display the

corresponding information for the 2.4GHz and 5GHz band networks.

2.4GHz is the frequency used by IEEE 802.11b/g/n wireless clients while 5GHz is used by IEEE

802.11a/ac wireless clients.

Note: This setting is configurable only when the MESH function is disabled in the

Network Setting > Wireless > MESH screen.

WiFi Network

Name

This is the wireless network name.

Password This is the password of the wireless network.

Action Click the Edit icon to configure the wireless network settings.