Users Manual Part 1

Chapter 7 Wireless
EMG6726/8726-B10A User’s Guide
80
7.3 The Guest WiFi Screen
This screen allows you to enable and configure multiple wireless networks for guests on the EMG.
You can view/configure one guest WiFi network and three extra WiFi networks on this screen. The extra
WiFi networks include two extra 2.4GHz WiFi networks and one extra 5GHz WiFi network. The only
difference between guest WiFi and extra WiFi is that you can configure the number of hours to keep the
guest WiFi network on before the EMG turns it off.
Click Network Setting > Wireless > Guest WiFi. The following screen displays.
Figure 32 Network Setting > Wireless > Guest WiFi
The following table describes the labels in this screen.
WiFi Security
Type
Select WPA2-PSK to add security on this wireless network. The WPA2-PSK security mode is a
newer, more robust version of the WPA encryption standard. It offers wireless clients a better and
secure connection. The wireless clients which want to associate to this network must have same
wireless security settings as the EMG.
Or you can select No Security to allow any client to associate this network and the guest wireless
network of the same wireless band (see Section 7.3) without any data encryption or
authentication.
Save Click Save to save your changes.
Cancel Click Cancel to restore your previously saved settings.
Table 15 Network Setting > Wireless > WiFi > Edit (continued)
LABEL DESCRIPTION
Table 16 Network Setting > Wireless > Guest WiFi
LABEL DESCRIPTION
Guest WiFi
Enable Guest
WiFi
Select this to enable the guest wireless network.
WiFi Network
Name
This field displays the guest WiFi network name.
Password This field displays the password used to connect to this guest wireless network.
Action Click the Edit icon to configure the WiFi network profile.
Extra WiFi
Band This field indicates whether this extra WiFi network uses 2.4GHz or 5GHz band.
WiFi Network
Name
This field displays the extra WiFi network name.