Users Manual Part 2

Chapter 12 Dynamic DNS Setup
EMG6726/8726-B10A User’s Guide
172
The following table describes the labels in this screen.
12.3 The Dynamic DNS Screen
Use this screen to change your EMG’s DDNS. Click Network Setting > DNS > Dynamic DNS. The screen
appears as shown.
Figure 109 Network Setting > DNS > Dynamic DNS
The following table describes the fields in this screen.
Table 65 DNS Entry: Add/Edit
LABEL DESCRIPTION
Host Name Enter the host name of the DNS entry.
IPv4 Address Enter the IPv4 address of the DNS entry.
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 66 Network Setting > DNS > > Dynamic DNS
LABEL DESCRIPTION
Dynamic DNS Setup
Dynamic DNS Select Enable to use dynamic DNS.
Service Provider Select your Dynamic DNS service provider from the drop-down list box. If it’s not in the
drop-down list, please select DNS user defined. Fill in the Connection Type and URL Update
fields.
Connection Type Select a protocol that your Dynamic DNS service server use.
URL Update Enter an URL of the Dynamic DNS provider.
Host/Domain
Name
Type the domain name assigned to your EMG by your Dynamic DNS provider.
You can specify up to two host names in the field separated by a comma (",").
Username Type your user name.
Password Type the password assigned to you.