Users Manual Part 2

Chapter 11 Network Address Translation (NAT)
EMG6726/8726-B10A User’s Guide
156
11.2.1 Add/Edit Port Forwarding
Click Add New Rule in the Port Forwarding screen or click the Edit icon next to an existing rule to open
the following screen.
Figure 93 Port Forwarding: Add/Edit
The following table describes the labels in this screen.
Protocol This shows the IP protocol supported by this virtual server, whether it is TCP, UDP, or TCP/UDP.
Modify Click the Edit icon to edit this rule.
Click the Delete icon to delete an existing rule.
Table 51 Network Setting > NAT > Port Forwarding (continued)
LABEL DESCRIPTION
Table 52 Port Forwarding: Add/Edit
LABEL DESCRIPTION
Active Select Enable or Disable to activate or deactivate the rule.
Service Name Enter a name to identify this rule using keyboard characters (A-Z, a-z, 1-2 and so on).
Obtain WAN IP
Automatically
Select this option to obtain the WAN IP address of the EMG.
WAN IP If you’re using multi-to-multi NAT, enter a WAN IP address provided by your ISP.