Users Manual Part 2

Chapter 23 Log
EMG6726/8726-B10A User’s Guide
236
23.2 The System Log Screen
Use the System Log screen to see the system logs. Click System Monitor > Log to open the System Log
screen.
Figure 153 System Monitor > Log > System Log
The following table describes the fields in this screen.
23.3 The Security Log Screen
Use the Security Log screen to see the security-related logs for the categories that you select. Click
System Monitor > Log > Security Log to open the following screen.
5 Notice: There is a normal but significant condition on the system.
6 Informational: The syslog contains an informational message.
7 Debug: The message is intended for debug-level purposes.
Table 106 Syslog Severity Levels
CODE SEVERITY
Table 107 System Monitor > Log > System Log
LABEL DESCRIPTION
Level Select a severity level from the drop-down list box. This filters search results according to the
severity level you have selected. When you select a severity, the EMG searches through all logs
of that severity or higher.
Category Select the type of logs to display.
Clear Log Click this to delete all the logs.
Refresh Click this to renew the log screen.
Export Log Click this to export the selected log(s).
Email Log Now Click this to send the log file(s) to the E-mail address you specify in the Maintenance > Logs
Setting screen.
# This field is a sequential value and is not associated with a specific entry.
Time This field displays the time the log was recorded.
Facility The log facility allows you to send logs to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
Level This field displays the severity level of the log that the device is to send to this syslog server.
Category This field displays the type of the log.
Messages This field states the reason for the log.