User's Guide

Chapter 4 Network
NAP Series User’s Guide
30
Figure 18 Configuration > Network > IP Setting
Each field is described in the following table.
Table 11 IP Setting
LABEL DESCRIPTION
IP Address
Assignment
Get
Automatically
Select this to make the interface a DHCP client and automatically get the IP address,
subnet mask, and gateway address from a DHCP server.
Use Fixed IP
Address
Select this if you want to specify the IP address, subnet mask, and gateway manually.
IP Address Enter the IP address for this interface.
Subnet Mask Enter the subnet mask of this interface in dot decimal notation. The subnet mask indicates
what part of the IP address is the same for all computers in the network.
Gateway Enter the IP address of the gateway. The NAP sends packets to the gateway when it does
not know how to route the packet to its destination. The gateway should be on the same
network as the interface.
DNS Server IP
Address
Enter the IP address of the DNS server.
Use Proxy to Access
NCC
If the NAP is behind a proxy server, you need to select this option and configure the proxy
server settings so that the NAP can access the NCC through the proxy server.
Proxy Server Enter the IP address of the proxy server.
Proxy Port Enter service port number used by the proxy server.