User's Guide

Chapter 5 Maintenance
NAP Series User’s Guide
36
Figure 24 Maintenance > Log > View Log
The following table describes the labels in this screen.
Table 14 Maintenance > Log > View Log
LABEL DESCRIPTION
Show Filter / Hide
Filter
Click this button to show or hide the filter settings.
If the filter settings are hidden, the Display, Email Log Now, Refresh, and Clear Log fields are
available.
If the filter settings are shown, the Display, Priority, Source Address, Destination Address, Source
Interface, Destination Interface, Protocol, Keyword, and Search fields are available.
Display Select the category of the log messages you want to view. You can also view All Logs or view
the Debug Log.
Priority Select the priority of log messages to display. The log displays the log messages with this priority
or higher.
Possible values from highest priority to lowest priority are:
•any
• emerg (emergency)
•alert
• crit (critical)
•error
• warn (warning)
• notice
• info (information)
Note: This field is read-only if Display is set to Debug Log.
Source Address Enter the source IP address of the incoming packet that generated the log message. Do not
include the port in this filter.
Destination
Address
Enter the IP address of the destination of the incoming packet when the log message was
generated. Do not include the port in this filter.
Source Interface Select the source interface of the packet that generated the log message.