User's Guide

Chapter 3 Hardware
NWA/WAC/WAX Series User’s Guide
35
Figure 13 NWA1123-ACv2 LED
The following are the LED descriptions for your NWA1123-ACv2.
Table 8 NWA1123-ACv2 LED
COLOR STATUS DESCRIPTION
Amber Blinks amber for 1 second
and green for 1 second
alternatively.
The LED blinks amber and green alternatively when the Zyxel
Device is booting up or is connecting to the NCC.
Green
Amber Blinks amber and green
alternatively 3 times and
then turns solid green for 3
seconds.
The Zyxel Device is discovering the NCC.
Green
Green On The Zyxel Device is ready for use and its wireless interface is
activated.
Slow Blinking (On for 1s,
Off for 1s)
The wireless module of the Zyxel Device is disabled or failed,
the Zyxel Device is in standalone mode and is using default
wireless settings or the Zyxel Device is connected to the NCC
but is unregistered with the NCC.
Fast Blinking (On for 50ms,
Off for 50ms)
The Locator LED is on.
Amber On The Zyxel Device is powered up.