User's Guide

Chapter 3 Hardware

NWA/WAC/WAX Series User’s Guide

Figure 15 NWA1123-AC HD LED

The following are the LED descriptions for your NWA1123-AC HD.

Table 10 NWA1123-AC HD LED

COLOR STATUS DESCRIPTION

Amber Blinks amber for 1 second

and green for 1 second

alternatively.

The Zyxel Device is booting up or connecting with NCC.

Green

Amber Blinks amber and green

alternatively 3 times and

then turns solid green for 3

seconds.

The Zyxel Device is discovering the NCC.

Green

Green Slow Blinking (On for 1

second, Off for 1 second)

The wireless module of the Zyxel Device is disabled or fails, the

Zyxel Device is in standalone mode and is using default

wireless settings, or the Zyxel Device is configured to be

managed by NCC but is not yet registered with the NCC.

Green Steady On The Zyxel Device is ready for use, the Zyxel Device’s wireless

interface is activated, and/or wireless clients are connected

to the Zyxel Device when it receives power using IEEE 802.3at

PoE plus (full power mode).

Amber Steady On The Zyxel Device is ready for use, the Zyxel Device’s wireless

interface is activated, and/or wireless clients are connected

to the Zyxel Device when it receives power using 802.3af PoE

(limited power mode).

Bright Blue Steady On The Zyxel Device’s wireless interface is activated, but there

are no wireless clients connected when it receives power

using IEEE 802.3at PoE plus (full power mode).