User's Guide

Chapter 3 Hardware
NWA/WAC/WAX Series User’s Guide
45
3.3.3 WAC6502D-E, WAC6502D-S, and WAC6503D-S
The following are the LED descriptions for your WAC6502D-E, WAC6502D-S, or WAC6503D-S.
Management Green On The Zyxel Device is managed by the NCC.
Slow Blinking (On for 1
sec, Off for 1 sec)
The Zyxel Device is connected to the NCC, but not
registered.The Zyxel Device is using default wireless
settings, or the Zyxel Device is connected to the NCC but
is unregistered with the NCC.
Amber Blinks amber for 1
second and green for 1
second alternatively
The Zyxel Device is searching for (discovering) the NCC.
Green
Amber Blinks amber and green
alternatively 3 times
and then turns solid
green for 3 seconds.
The NCC is connecting to the registered Zyxel Device.
Green
Off The Zyxel Device is in standalone mode.
UPLINK Amber On The port is operating as a 10/100 Mbps connection.
Blinking The Zyxel Device is sending/receiving data through the
port at 10/100 Mbps.
Green On The port is operating as a Gigabit connection (1000
Mbps).
Blinking The Zyxel Device is sending/receiving data through the
port at 1Gbps.
Off The port is not connected.
WLAN Green On The 2.4 GHz WLAN is active.
Off The 2.4 GHz WLAN is not active.
WLAN Green On The 5 GHz WLAN is active.
Off The 5 GHz WLAN is not active.
LAN Amber On The port is operating as a 10/100 Mbps connection.
Blinking The LAN port is sending/receiving data through the port
at 10/100 Mbps.
Green On The port is operating as a Gigabit connection (1000
Mbps).
Blinking The LAN port is sending/receiving data through the port
at 1 Gbps.
Off The LAN port is not connected.
Table 14 NWA1302-AC LEDs (continued)
LED COLOR STATUS DESCRIPTION