User's Guide

NWA/WAC/WAX Series User’s Guide

CHAPTER 4

The Web Configurator

4.1 Overview

The Zyxel Device Web Configurator allows management using an Internet browser.

In order to use the Web Configurator, you must:

• Use Internet Explorer 10.0 and later versions, Mozilla Firefox 36.0 and later versions, Safari 9.0 and later

versions, or Google Chrome 38.0 and later versions.

• Allow pop-up windows.

• Enable JavaScript (enabled by default).

• Enable Java permissions (enabled by default).

• Enable cookies.

The recommended screen resolution is 1024 x 768 pixels and higher.

4.2 Accessing the Web Configurator

1 Make sure your Zyxel Device hardware is properly connected. See the Quick Start Guide.

2 If the Zyxel Device and your computer are not connected to a DHCP server, make sure your computer’s

IP address is in the range between "192.168.1.3" and "192.168.1.254".

3 Browse to the Zyxel Device’s DHCP-assigned IP address or http://192.168.1.2. The Login screen appears. If

you are in NCC mode, check the NCC’s AP > Monitor > Access Point screen for the Zyxel Device’s LAN IP

address.