User's Guide

Chapter 7 Setup Wizard

NWA/WAC/WAX Series User’s Guide

The screen varies depending on the security type you selected.

• SSID: Enter a descriptive name of up to 32 printable characters for the wireless LAN.

• VLAN ID: Enter a VLAN ID for the Zyxel Device to use to tag traffic originating from this SSID.

Band Mode: Select the wireless band which this profile should use. 2.4 GHz is the frequency used by

IEEE 802.11b/g/n wireless clients. 5 GHz is the frequency used by IEEE 802.11ac/a/n wireless clients.

• Security Type: Select WPA2 to add security on this wireless network. Otherwise, select OPEN to allow

any wireless client to associate this network without authentication.

•

PSK (Pre-shared Key)Personal: If you set Security Type to WPA2 and select PSKPersonal, enter a pre-

shared key of between 8 and 63 case-sensitive ASCII characters (including spaces and symbols) or 64

hexadecimal characters.

•

802.1XEnterprise: Select this option 802.1X and the Primary / Secondary RADIUS Server check box to

have the Zyxel Device use the specified RADIUS server. You have to enter the IP address, port number

and shared secret password of the RADIUS server to be used for authentication.

Click OK to proceed. Click Cancel to close the screen without saving.

Figure 38 Wizard: SSID: Edit (WPA2-

PSKPersonal)