User's Guide

DRAFT
Chapter 2 Hardware
Multy WiFi System User’s Guide
17
Red On The Multy Device in primary Multy mode failed to connect to the Internet, the
Multy Device in extender mode cannot connect to the primary
Multy,Bluetooth is not working on the Multy Device, or the Multy Device
encountered a system error.
Slow Blinking An error occurred during firmware update.
Fast Blinking The Multy Device is in the process of restoring to default.
Table 4 WSR30 LED Descriptions
COLOR STATUS DESCRIPTION
Off The Multy Device is not receiving power.
White Blinking The Multy Device is booting up.
On The Multy Device power is on.
Blue Blinking The Multy Device Bluetooth is being configured.
On The Multy Device Bluetooth is ready.
Pink/Blue Rotate The Multy Device is ready for use. Rotate here means the pink light will move around
the LED indicator while the blue light is stationary.
Amber Blinking The Multy Device is undergoing firmware upgrade.
Fast Blinking The Multy Device is being reset.
Red On The Multy Device in primary AP
Multy mode failed to connect to the Internet or the
Multy Device in extender mode cannot connect to the primary Multy.
Table 3 WSQ60/WSQ50/WSQ20 LED Descriptions (continued)
COLOR STATUS DESCRIPTION