Operation Manual

VMG/XMG Series User’s Guide
114
CHAPTER 6
Broadband
6.1 Overview
This chapter discusses the Zyxel Device’s Broadband screens. Use these screens to configure your Zyxel
Device for Internet access.
A WAN (Wide Area Network) connection is an outside connection to another network or the Internet. It
connects your private networks, such as a LAN (Local Area Network) and other networks, so that a
computer in one location can communicate with computers in other locations.
Figure 72 LAN and WAN
6.1.1 What You Can Do in this Chapter
Use the Broadband screen to view, remove or add a WAN interface. You can also configure the WAN
settings on the Zyxel Device for Internet access (Section 6.2 on page 118).
Use the Cellular Backup screen to configure cellular WAN connection (Section 6.3 on page 127).
Use the Advanced screen to enable or disable PTM over ADSL, Annex M/Annex J, and DSL PhyR
functions (Section 6.4 on page 133).
DSL
Table 28 WAN Setup Overview
LAYER-2 INTERFACE INTERNET CONNECTION
CONNECTION DSL LINK TYPE MODE ENCAPSULATION CONNECTION SETTINGS
ADSL/VDSL over
PTM
N/A Routing PPPoE PPP information, IPv4/IPv6 IP address,
routing feature, DNS server, VLAN,
QoS, and MTU
IPoE IPv4/IPv6 IP address, routing feature,
DNS server, VLAN, QoS, and MTU
Bridge N/A VLAN and QoS