Operation Manual

Chapter 7 Wireless
VMG/XMG Series User’s Guide
153
7.5 The WPS Screen
WiFi Protected Setup (WPS) allows you to quickly set up a wireless network with strong security, without
having to configure security settings manually. To set up a WPS connection between two devices, both
devices must support WPS. It is recommended to use the Push Button Configuration (PBC) method if your
wireless client supports it. See Section 7.11.8.3 on page 170 for more information about WPS.
Note: The Zyxel Device applies the security settings of the SSID1 profile (see Section 7.2 on
page 143). If you want to use the WPS feature, make sure you have set the security
mode of SSID1 to WPA2-PSK or No Security.
Note: If WPS is enabled, UPnP will automatically be turned on.
Note: The WPS switch is grayed out when wireless LAN is disabled.
Click Network Setting > Wireless > WPS. The following screen displays. Click this switch and makes it turn
blue. Click Apply to activate the WPS function. Then you can configure the WPS settings in this screen.
Figure 91 Network Setting > Wireless > WPS