Operation Manual

Chapter 10 Quality of Service (QoS)
VMG/XMG Series User’s Guide
207
The following table describes the labels in this screen.
10.4.1 Adding a QoS Queue
Click Add New Queue or the Edit icon in the Queue Setup screen to configure a queue.
Figure 125 Queue Setup: Add
Table 67 Network Setting > QoS > Queue Setup
LABEL DESCRIPTION
Add New
Queue
Click this button to create a new queue entry.
# This is the index number of the entry.
Status This field displays whether the queue is active or not. A yellow bulb signifies that this queue is
active. A gray bulb signifies that this queue is not active.
Name This shows the descriptive name of this queue.
Interface This shows the name of the Zyxel Device’s interface through which traffic in this queue passes.
Priority This shows the priority of this queue. The lower the number, the higher the priority level.
Weight This shows the weight of this queue.
Buffer
Management
This shows the queue management algorithm used for this queue.
Queue management algorithms determine how the Zyxel Device should handle packets when
it receives too many (network congestion).
Rate Limit This shows the maximum transmission rate allowed for traffic on this queue. Rate limit 0 means
there's no rate limit on this queue.
Modify Click the Edit icon to edit the queue.
Click the Delete icon to delete an existing queue. Note that subsequent rules move up by one
when you take this action.