Operation Manual

Chapter 20 Parental Control
VMG/XMG Series User’s Guide
276
Figure 177 Security > Parental Control > Add/Edit PCP > Add New Service
The following table describes the fields in this screen.
Click Security > Parental Control > Add New PCP > Add to open the following screen.
Redirect
blocked site to
Zyxel Family
Safety page
Select this to redirect users who access any blocked websites listed above to the Zyxel Family
Safety page as shown next.
Figure 176 Zyxel Family Safety Page Example
Cancel Click Cancel to exit this screen without saving.
OK Click OK to save your changes.
Table 109 Security > Parental Control > Add/Edit PCP > Add New Service
LABEL DESCRIPTION
Add New
Service
Select the name of the service from the drop-down list. Otherwise, select User Define and specify
the name, protocol, and port of the service.
If you have chosen a pre-defined service in the Service Name field, this field will not be
configurable.
Protocol Select the transport layer protocol used for the service. Choices are TCP, UDP, or TCP & UDP.
Port Enter the port of the service.
If you have chosen a pre-defined service in the Service Name field, this field will not be
configurable.
Cancel Click Cancel to exit this screen without saving.
OK Click OK to save your changes.
Table 108 Security > Parental Control >Add/Edit PCP (continued)
LABEL DESCRIPTION