Operation Manual

Chapter 26 VoIP Status
VMG/XMG Series User’s Guide
326
Codec This field displays what voice codec is being used for a current VoIP call through a phone port.
From Phone Port
Type
This field displays the phone ports type used to originate, start, or create the current VoIP call.
Two possible type values will be displayed here:
SIP - For the current call which is categorized as Incoming Call in the Call Type filed, this field will
show the type SIP.
FXS - As for the other cases: Outgoing Call and Internal Call, this field will show the
corresponding local phone port type: FXS, the legacy analog phone port on the device.
To Phone Port
Type
This field displays the phone ports type used to receive the current VoIP call. Three possible type
values will be displayed here:
SIP - For the current call which is categorized as Outgoing Call in the Call Type field, this field will
show the type SIP.
FXS and Unknown - As for the other cases: Incoming Call and Internal Call, this field will show the
corresponding local phone port type: FXS, the legacy analog phone port on the device. While
the call is established, this field shows Unknown during the call setup phase (signaling phase).
This is because one or more local phone ports can be configured or designed to receive these
two types of calls, see the Call Type above, and the local phone port will answer the call that
hasn’t been determined yet at that time.
Peer Number This field displays the SIP address of the party that is currently engaged in a VoIP call through a
phone port.
Phone Status
Phone This field displays the name of a phone port on the Zyxel Device.
Outgoing
Number
This field displays the SIP address that you use to make calls on this phone port.
Incoming
Number
This field displays the SIP address that you use to receive calls on this phone port.
Table 141 System Monitor > VoIP Status (continued)
LABEL DESCRIPTION