Operation Manual

Chapter 1 Introducing the Zyxel Device

VMG/XMG Series User’s Guide

1.4.2 LEDs (Lights)

None of the LEDs are on if the Zyxel Device is not receiving power.

Table 4 VMG1312-B10D LED Descriptions

LED COLOR STATUS DESCRIPTION

POWER Green On The Zyxel Device is receiving power and ready for use.

Blinking The Zyxel Device is self-testing.

Red On The Zyxel Device detected an error while self-testing, or there is a device

malfunction.

Off The Zyxel Device is not receiving power.

DSL Green On The DSL line is up.

Blinking The Zyxel Device is initializing the DSL line.

Off The DSL line is down.

INTERNET Green On The Zyxel Device has an IP connection but no traffic.

Your device has a WAN IP address (either static or assigned by a DHCP

server), PPP negotiation was successfully completed (if used) and the DSL

connection is up.

Blinking The Zyxel Device is sending or receiving IP traffic.

Off There is no Internet connection or the gateway is in bridged mode.

Red On The Zyxel Device attempted to make an IP connection but failed. Possible

causes are no response from a DHCP server, no PPPoE response, PPPoE

authentication failed.

ETHERNET1~4 Green On The Zyxel Device has a successful 10/100 Mbps Ethernet connection with a

device on the Local Area Network (LAN).

Blinking The Zyxel Device is sending or receiving data to/from the LAN at 10/100

Mbps.

Off The Zyxel Device does not have an Ethernet connection with the LAN.

WLAN/WPS Green On The wireless network is activated.

Blinking The Zyxel Device is communicating with wireless clients.

Amber Blinking The Zyxel Device is setting up a WPS connection with a wireless client.

Off The wireless network is not activated.

USB Green On The Zyxel Device recognizes a USB connection through the USB slot.

Blinking The Zyxel Device is sending/receiving data to/from the USB device

connected to it.